Using the correct tool in construction, as with other professions, is critical to the project’s success. Even seemingly easy actions, such as leveling, can become hard without the proper tools. A manual level can perform the job, but it is inefficient for large scale construction projects. This is when laser levels come in handy. Making the distinction between laser levels and the one you require for the task at hand might possibly save you a significant amount of time.

Some laser levels are intended for specialized activities, such as flooring levels, whilst others are intended to be multi-purpose. In any event, there is a solution to any difficulty that may arise on the job site. Let’s take a closer look at the most common laser types: laser cross line level, rotating lasers, and plane lasers.

Cross Line Laser Level

These lasers may generate both horizontally and vertically laser lines across a work surface. This feature is especially handy when paving walls and installing shelving, kitchen cabinets, and other similar projects that require perfect angles. Laser cross line levels can work with either the vertical or horizontal line alone, or both at once, making them among the most versatile leveling instruments available. If you wish to use them outside, you should acquire a laser detector.

Rotating Laser Level

Because of their capability to produce a long, 360° laser line, these lasers are suitable for huge operations such as leveling a whole work site. One diode spin swiftly, giving the appearance of a stable line on the work surface.

These rotating laser levels, unlike others, do not restrict you to a specific direction because the laser line can appear everywhere around you. These lasers are often meant to make horizontal lines, although there are types that include vertical lines as well. Just as with cross laser levels, if you wish to use a rotary laser outside, you’ll need a detector.

For excavating or leveling dirt, grade rods have been used in conjunction with rotating lasers. While the rotary is spinning, you should move the detector up and down on the grade rod until you find the laser line. When that red line is discovered, you have created a “grade” or level.

If you want to dig a 3-inch-deep hole, for instance, you would slide the detector 3 inches upward the grade rod. After digging 3 inches down and inserting the grade rod, you will hear a beep and see that the laser is striking the detector. This is proof that you excavated the 3 inches deep hole.

Plane Laser Level

Plane laser levels integrate the benefits of rotating and cross line lasers, allowing them to produce a solid, permanent 360° line horizontally and vertically. The disadvantage is that they do not have the same operating range as rotary lasers.

They are best suited for interior applications and shorter distances. Even when working outside, close-range leveling can be accomplished without the need of a detector. Plane laser levels are great for planning out ducting and pipe work, fitting window frames, and constructing framework for bookshelves, cupboards, and dry-walls, among other things.

Tags